by Mitch Burnett
Most alarm panels traditionally give indication of a low battery on the keypad. After ordering a replacement UltraTech battery, here's how to replace the battery in your alarm panel with the new UltraTech replacement battery.
1) Remove the existing battery, by disconnecting the two (typically red and black) leads attached to the metal contacts on the battery
2) Attach the new replacement UltraTech Alarm Battery, matching the red and black lead wires to the same metal terminals taking note to connect the red lead to the metal terminal with plastic underneath it and the black to black
3) Wait one to five hours, as it may take up to five hours for the low battery indicator to disappear from your connected keypad
After following the above steps, your UltraTech Alarm Battery should be completely operational and functional and able to provide battery backup power in case your alarm system is involved in another blackout, brownout or any other inconsistent power situations.
Your original UltraTech Alarm Battery that you have now replaced, is fully recyclable and in most states it is illegal to dispose of it any other way. They are typically recycled at full service auto mechanics, but check the local waste management officials in your area for exact disposal procedures.
UltratechBatteries.com is not affiliated with the Ultratech Power Products Brand in any way. Content, images and links provided on this site are purely for informational purposes only and are provided on an “as is” basis. Content found on this page has either been created by the operators of this website or obtained from publicly available sources. By using this website, it is understood and agreed to by the user that the website owners and its contributors make no warrant as to the quality or accuracy of the information provided and shall not be held liable for any claims resulting from the use of this website. Security Alarms and Replacement Alarm Batteries may be components of a life safety system and decisions thereon should be made in consultation with a Security or Life Safety professional.